Water Wash Spray Booth
SPECIFICATION
WATER WASH SPRAY BOOTHS ARE OF THE PUMP AND NOZZLE TYPE WITH A 1.6M HIGH WATER CURTAIN IN 304 STAINLESS STEEL
MECHANICAL PUMP SEALS FITTED AS STANDARD (PLEASE SUPPLY A MSDS DATA SHEET TO CHECK SUITABILITY OF APPLICATION)
WATER WASH SPRAY BOOTH INTERNAL WORKING DIMENSIONS — 3000MM WIDE X 1000MM DEEP X 2250MM HIGH
- THE FAN HAS BEEN RATED TO PROVIDE A NOMINAL AVERAGE AIRFLOW OF 0.7M/S THROUGH THE FILTERS
- THE WATER TANK IS FULLY WELDED AND POWDER COATED, THE DISCHARGE PIPEWORK IS ABS PLASTIC
- THE FAN WILL BE BELT DRIVEN BY A 3 KW MOTOR ELECTRIC SUPPLY 415V/3PH/50HZ
- AN ISOLATION VALVE IS FITTED AS STANDARD TO ALLOW PUMP MAINTENANCE WITHOUT DRAINING
- WATER WASH SPRAY BOOTHS ARE CONSTRUCTED FROM 1.2MM GALVANISED STEEL
- THE BDA FAN WILL BE DISCHARGED VERTICALLY FROM THE SPRAY BOOTH
- PUMP CAN BE SPECIFIED AS LEFT OR RIGHT HANDED AT TIME OF ORDER
- FAN NOISE LEVELS ESTIMATED BETWEEN 80-95DB
- LIGHTING – 1 X 1500 TWIN BATTEN LED FITTING
- FAN DIAMETER OR DIAMETERS —1 X 710MM
PRODUCT SILHOUETTES IN FRONT CANOPY APPROX. 750MM X 750MM
Introducing our cutting-edge Powder Coating Water Wash Spray Booth, designed to revolutionize your powder coating process! Our booth is equipped with state-of-the-art water wash technology that captures and filters overspray particles, ensuring a clean and environmentally-friendly operation.
With our booth, you can say goodbye to overspray concerns. Our water curtains expertly capture and contain overspray particles, preventing them from escaping into the air and creating a mess in your facility. The captured particles are then efficiently removed from the water through our advanced filtration system, maintaining clean water for continued use.
Not only does our booth provide superior overspray capture and containment, but it also creates a safe working environment for your operators. Our exhaust fans and ventilation systems ensure proper airflow, while our lighting and controls make operation easy and efficient.
The operation of a powder coating water wash spray booth typically involves the following steps:
Powder application:
The powder coating material is sprayed onto the substrate using a spray gun or other powder coating application equipment. The charged powder particles adhere to the grounded substrate, creating a uniform coating.
Overspray capture:
As the powder is sprayed, some of it does not adhere to the substrate and becomes overspray. The overspray particles are captured by the water in the booth, which acts as a filtration medium. The water captures the overspray particles, which then sink to the bottom of the booth.
Water filtration:
The water in the booth is circulated through a filtration system that removes the captured overspray particles, as well as other contaminants such as dust and debris. The filtered water is then recirculated back into the booth for reuse.
Booth maintenance:
The captured overspray particles, along with other debris, accumulate in the bottom of the booth and need to be periodically removed and properly disposed of. This typically involves draining the water and removing the accumulated sludge for disposal or further treatment.
Environmental compliance: Powder coating water wash spray booths are designed to comply with environmental regulations and prevent the release of overspray particles into the environment. Proper operation and maintenance of the booth, including regular water filtration and sludge disposal, are important for environmental compliance.
By investing in our Powder Coating Water Wash Spray Booth, you can improve your powder coating process, reduce environmental pollution, and provide a clean and safe working environment for your team. Join the ranks of satisfied customers who have already experienced the benefits of our cutting-edge technology. Contact us now to learn more and take your powder coating process to the next level!
WANTED NOW
Second hand Powder coating equipment
Second Hand Powder coating ovens
Complete Used Powder coating systems
Ovens. Booths . Conveyors .
Pre Treatment :
Powder Reclaim systems
Alloy Wheel Refinishing Systems
We are always looking for good used equipment customers awaiting
Please Note : We also manufacture and Install New Powder Coating systems